Easy Guide to Transfer Fuel without Spillage
Each one of us may have tried fuel transfer in one form or the other. The most common reason of fuel transfer is empty fuel tank away from the fuel station. In such condition, we need to transfer the fuel from drum to car and the real challenge lies in doing it without spillage and wastage. Fuel spillage may not just result in the loss of fuel but it will also become dangerous at times. It is therefore important to find the ways to transfer the fuel without any spillage during the process.
- Funnel – One common way to do this is to use the funnel. If the drum or can holding the fuel is not very big then funnel will be the right choice. All you need to do is place the funnel in the car tank and start pouring the fuel slowly. The chances of spillage are very low as the funnel will work guiding tool. This technique will however not work if the drum is too big to carry.
- Rubber Pipe – A small rubber pipe can work if the drum holding the fuel is too big to be lifted for fuel transfer. A rubber pipe is placed such that its one end lies in the drum while other end is inserted into the fuel tank. The usual method here is to such the fuel till from the receiving end till it starts flowing and then wait till the transfer is done.
- Fuel Transfer Pump – Fuel transfer is made further easy with 12 Volt Fuel Transfer Pump. This pump is very small and designed for fuel transfer. It is very handy and can be used anywhere without hassles. It makes the fuel flow from one location to another without sucking or effect of gravity. It is very simple to operate and designed out of corrosion free material.
There are many other pumps that can be used along with this fuel transfer pump to make your life easy. Some popular pumps are sprinkler pump, sewerage pump, hot water pump, and water transfer pump. Check out for expert help to get end to end assistance.