Types of NBN Connections

Types of NBN Connections

An internet connection is not just a privilege but a need in the present day and time. The NBN connections provide an appropriate type of connectivity based on your location. There are many different types of NBN connections that are built to serve a particular type of location. You should also Look for an NBN battery for sale to avoid any disruption in the connectivity because of power shutdowns. These will give you enough time to complete your task in hand and shut down your system properly. While you can choose a battery depending on your power needs, choosing the type of connection types is not an option. The type of connection you get depends on the area you live in. However, it is always beneficial to understand the terminology and technology of the connection that you use for efficient usage.

  • Fixed-line connection types

In this type of connection, you get fixed lines that are laid up to your property. These lines provide direct and dedicated services to you.

  • Fiber to the Premises (FTTP)

This type of connection is considered the best. FTTP connection provides high-speed connectivity through direct fiber-optic cables laid to your premises. The connection is much better than other types in terms of consistency. One of the reasons for the high-quality connectivity is that FTTP is also a less common type of connection. This keeps the amount of traffic in check and provides better performance.

  • Fiber to the Building (FTTB)

The FTTB connection is most commonly used for block and buildings. You have to have a secured cabinet host the primary FTTB connection for your building. It can be in the basement or in a connecting room which is well protected. Once the connection has reached your building, it is distributed to the individual apartments via existing copper or Ethernet cables.

  • Fiber to the Curb (FTTC)

FTTC is an alternative for the tedious installation of FTTP and also address performance deficiencies of FTTN. The connection is provided through fibers to a distribution unit. This unit is generally placed underground. Connections to the individual nodes are made through the existing cable network.

  • Fiber to the Node (FTTN)

In these types of connections, the pre-existing copper cables are used for connectivity. These cables have a lower bandwidth than fiber optic cables. These connections are less expensive but provide a slower download and upload experience.

Hybrid fiber-coaxial (HFC cable)

It is the most primitive technology that serves the NBN connections to some catchment areas. These areas have the HFC already installed. The existing pay-TV cables are used to complete the final part of the NBN connection.

  • Fixed wireless connection types

These types of connections are providing internet to the people living in rural areas where the habitation is scattered and lacks proper infrastructure.

  • Fixed wireless

This connection is similar to mobile phone networks and runs through transmission towers. These towers are ideally 14 km apart and need an antenna at your premises to receive the connection. This antenna is connected to a power that runs on power,

  • Satellite 

These are also used to provide internet to the hard-to-reach areas. You must have a satellite dish and an NBN qualified modem for this connection to function.

Edward Powell

Leave a Reply

Your email address will not be published. Required fields are marked *